Compare patterned, subway, textured and timber-look bathroom tiles, with practical checks for wet areas and quotes.
On this page6 sections
Use patterned tiles where they can stand out
Try a patterned tile behind the vanity or on a single wall. Lay several pieces together before buying so you can see the repeat and where it will end. Ask your tiler how the pattern will meet the mirror, power points and edges. A plain tile nearby gives the pattern room without adding another difficult layout.
Choose tiles for a small bathroom
Take the wall and floor measurements to your tiler and ask them to sketch the set-out before you buy. In a narrow room, check what size cuts will land next to the vanity and door. A quieter tile on most surfaces leaves room for a pattern behind the vanity or inside a niche. For the shower floor, ask how the proposed tile size will work with the drain and fall.
Choose a subway tile layout and grout together
A stacked layout lines the joints up, while a staggered layout breaks up the grid. Hold grout samples against the tile in the room’s light. Similar tones make the joins quieter. Contrasting grout makes the layout more visible, including any variation in the lines.
What would your job cost?
Get real quotes from local tilers
Describe the job in a sentence. We'll send it to verified tilers near you.
Free · No obligation

Put texture where it’s easy to clean
Look at a raised tile under the actual bathroom light to see how deep the shadows are. A textured feature beside the mirror may be easier to wipe down than the same tile behind the shower. Ask the supplier whether the tile and grout suit the intended location and what cleaning they require.

Check how timber-look tiles will meet drains and edges
If you like a timber look on the floor, confirm the product is suitable for wet floor use. Ask the tiler to lay out a few planks so you can see the repeat. In the shower, ask how the tile size works with the fall to the drain and how the finished surface meets the rest of the floor.
Rather not lose the weekend?
Compare quotes from verified tilers near you. Free, no obligation.

Sort out waterproofing before you order tiles
Ask who will inspect the existing surface, who will do any waterproofing and how the finished work will be documented. The ABCB guide to waterproofing in houses explains the distinction between wet-area waterproofing and the surface finish. Ask your contractor which requirements apply to your job.
Give each tiler the same wall and floor measurements and product details. Compare removal, levelling, waterproofing, trims and laying separately using our tiling cost guide.

