On this page10 sections
Stencilling gives a plain grey driveway, path or patio the look of brick, tile or stone without pulling the old concrete out. This guide covers what it costs in 2026, what moves the price, and how stencilling compares with stamped concrete.
Use these approximate allowances for initial budgeting and confirm current prices and scope with your contractor. The whole-driveway example does not specify an area; it is not a fixed package price.
How much does concrete stencilling cost?
The indicative whole-driveway allowance is $3,000 to $4,500; actual quotes depend on area and inclusions. Where your job lands depends on the size of the driveway, the pattern and colours you choose, and the state of the concrete underneath.
Cracks, chips and loose patches need fixing before the stencil goes down, or they show through the finish. A concrete repair specialist or your stencilling contractor can do this, at extra cost. If the slab is too far gone to repair, you'll be paying for new concrete first.
Concrete stencilling cost per square metre
An indicative stencil-finish allowance is about $45 to $70 per square metre. Ask the contractor whether the quote covers resurfacing an existing slab, stencilling during a new pour, preparation and sealer. New concrete and major repairs need separate allowances.
The rate doesn't include laying new concrete. If you don't have a slab yet, add the cost of the pour. Our concreting cost guide has prices per square metre and per cubic metre.
When you compare quotes, check whether each one includes:
What would your job cost?
Get real quotes from local concrete resurface
Describe the job in a sentence. We'll send it to verified concrete resurface near you.
Free · No obligation
- Pressure cleaning and preparing the surface
- Crack and patch repairs
- The stencil coating and colours
- Sealer, and how many coats
- Removing and disposing of old coatings, if there are any
What pushes the price up
- Area: a double driveway with a path to the front door takes more material and more hours than a single driveway.
- Condition of the slab: the more repairs the old concrete needs, the higher the quote.
- Pattern and colours: a single-colour brick pattern is quicker to lay than a multi-colour design with borders.
- Existing coatings: old paint or sealer has to come off before the new coating will bond.
- Access and shape: curves, steps and tight side paths slow the job down.

What is concrete stencilling?
Concrete stencilling is a resurfacing method that prints a pattern onto concrete. The contractor lays a paper stencil over the slab, sprays a coloured cement-based coating across it, then lifts the stencil away. The lines where the stencil sat stay the base colour and read as grout lines.
A typical job runs in this order:
- Pressure clean the concrete and repair any cracks.
- Lay the stencil in the chosen pattern.
- Spray or trowel on the coloured coating.
- Remove the stencil once the coating has set.
- Seal the surface to protect the colour.
It works on driveways, paths, patios, pool surrounds and outdoor entertaining areas.
Stencilled vs stamped concrete
Stamped concrete is pressed with patterned mats while the concrete is still wet, so it's done when the slab is poured. Stencil systems may be used during a new pour or with a suitable resurfacing coating over existing concrete. Ask your contractor which system suits the slab and the finish you want.
If you're laying new concrete anyway, ask your concreter to quote both finishes. If your driveway is in good shape and you only want it to look better, stencilling avoids paying for a new slab.
Stencil patterns and colours
Common stencil patterns include brick, block, basket weave, herringbone, cobblestone, tile, diamond, European fan and rosette. Most can be laid in one colour or several, with a border in a contrasting shade.
Rather not lose the weekend?
Compare quotes from verified concrete resurface near you. Free, no obligation.
Ask to see the contractor's colour chart and photos of finished jobs in the pattern you like. A pattern looks different across a full driveway than on a sample board.

Benefits and drawbacks of concrete stencilling
The benefits:
- It changes how your home looks from the street without a new slab.
- It's less work than breaking out the old slab and pouring a new one.
- The sealer helps the surface resist oil and dirt stains.
- An anti-slip additive can be mixed into the sealer for wet areas such as pool surrounds.
The drawbacks:
- It's a coating, so it can wear where cars turn and brake, and it needs resealing from time to time.
- It won't fix a slab that's cracking because of movement or poor ground underneath.
Who to hire for concrete stencilling
Look for a concrete resurfacing specialist or a concreter who does decorative finishes. You can post your job on Service.com.au for free and compare quotes from verified businesses. Before you choose, ask each one:
- How many stencilling jobs have you done, and can I see photos?
- What preparation and repairs does my concrete need?
- Which coating and sealer do you use, and how often will it need resealing?
- Do you hold the licence and insurance this job needs in my state?
Tip: Ask every contractor to quote the same area, pattern and number of sealer coats. Then you can compare quotes line by line.
More cost guides
- How Much Does Concreting Cost?
- How Much Does It Cost to Paint a Concrete Driveway?
- How Much Does Concrete Polishing Cost?
- How Much Does Timber Decking Cost?
All prices in this guide are approximate and accurate at the time of writing. They may differ by location and from business to business.

